Drivers and Software

• Macintosh
   
  • Elite 600 Application Files v1.1 (9/16/1995) - The application files for the Elite 600 family of printers. The files include the .PPD, .PDX, .PDF, and .MPD files for the Elite 600. Please refer to the documentation included with your software applications for further information regarding these files.
    • Download (53 KB) (FTP) (HTTP)
    
     
  • Elite 600 Laserwriter 7.1.2 Driver (9/16/1995) - For use with older MacOS versions (pre-System 7.5). For newer versions, we recommend using the standard Laserwriter 8 driver on the Mac system with the PPD file from the Elite 600 Application Files archive installed.
    • Download (245 KB)(FTP) (HTTP)
    
     
• Windows
   
  • Driver (2/6/1997) - The Windows 95/98/ME, 3.x, NT 3.5, and NT 4.0 Elite 600 driver and application files for the Elite 600 family of printers. All related installation information is included in the README files that are included in the compressed archive.
    • Download (402 KB - Self Extracting Zip) (FTP) (HTTP)
    
     

• EP Magazine Trouble Report Form (PDF - 113 KB) - Use this form to request a Return Merchandise Authorization (RMA) from GCC Tech Support for an EP Magazine that fails within 90 days of purchase.
• GCC Return Merchandise Authorization - For US customers only: Is there something wrong with your printer, and you need to return it to GCC for repair? Before you call Tech Support to get a Return Authorization (RMA) Number, print out this form, fill out the requested information and fax the form to GCC Technical Support at (781) 275-1115. If you are a GCC Authorized Dealer, use the Dealer RMA Request Form (PDF - 20 KB) instead.
  Once you have completed the RMA Authorization form, you must contact GCC Technical Support to receive a valid RMA number. Do not return your printer without a valid RMA number. RMA numbers are valid for 30 days only.
• Printing over Novell - Easy to follow, detailed instructions on how to set up and print to a GCC printer on a Novell network.
• Printing with AutoCAD - Instructions on how to configure AutoCAD to print to a GCC printer, using either PostScript or PCL.
• Ethernet 10BaseT Crossover Cable Instructions - If you are using only one computer with your printer, your printer has an Ethernet card, and your computer has a RJ-45 Ethernet port, you can use EtherTalk to connect your computer and printer without buying an Ethernet hub.